EPEVER SOLAR CHARGE CONTROLLER SETUP: TRACER AN Collection CONTROLLE
EPEVER SOLAR CHARGE CONTROLLER SETUP: TRACER AN Collection CONTROLLE
Blog Article
The EPEVER Tracer AN Sequence Photo voltaic Charge Controller is often a extremely productive photo voltaic controller suitable for off-grid photo voltaic systems. Determined by multiphase synchronous rectification technology, it ensures optimized Power conversion and program security for a wide array of photovoltaic (PV) apps.
Vital Features from the EPEVER Tracer AN Sequence Controller
The Tracer AN sequence utilizes EPEVER Solar Cost Controller technological innovation for excellent photo voltaic Strength harvesting. Critical options involve:
Multiphase Synchronous Rectification (MSR) for enhanced Electrical power conversion.
Advanced MPPT Algorithm with >99% effectiveness.
Twin-Phase Charging for Increased battery life.
LCD Screen with actual-time info monitoring.
Numerous Load Manage Modes such as manual and timer.
Complete Electronic Protections against overcharging, around-discharging, shorter circuits, and reverse polarity.
Move-by-Action Tutorial to Putting together the EPEVER Tracer AN Sequence Controller
1. Unboxing and Getting ready the Controller
Make sure all components are included: Tracer AN device, temperature sensor, communication cables, and user manual.
Verify the model variety and voltage ratings match your solar panel and battery specifications.
two. Mounting the Demand Controller
Pick a effectively-ventilated, dry place close to the battery lender.
Safe the Tracer AN controller using the supplied mounting brackets.
Maintain good clearance for warmth dissipation.
3. Wiring the Solar Charge Controller
Warning: Often comply with appropriate safety protocols and make sure the process is driven off prior to connecting components.
Action 1: Connect the battery terminals into the demand controller (constructive to good, negative to destructive).
Phase 2: Join the photo voltaic panel visit here array towards the PV enter terminals.
Phase 3: Join the load terminals if utilizing a direct load relationship.
Action 4: Double-Examine all connections for polarity and tightness.
four. Configuring the Controller Options
Electrical power around the controller by connecting the battery to start with.
Make use of the LCD Display screen to navigate the options menu.
Configure:
Battery Type: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Regulate Modes: Guide, timer, light Regulate.
5. Checking and Info Logging
The Tracer AN Series supports true-time monitoring utilizing the MT50 remote meter.
Data is often logged by way of the RS485 communication port using program for instance Solar Station Laptop.
Remote checking is possible Along with the EPEVER WiFi module.
6. Troubleshooting Popular Troubles
Issue one: No Power Output
Check out battery voltage and connections.
Verify PV panel voltage exceeds battery voltage.
Situation 2: In excess of-Voltage Protection
Confirm the solar array’s voltage score.
Regulate technique parameters if necessary.
Situation three: No Battery Charging
Inspect PV wiring for continuity.
Validate MPPT configurations inside the menu.
Great things about the Tracer AN Collection with MSR Technologies
The multiphase synchronous rectification know-how guarantees:
Better Efficiency: Diminished energy losses for the duration of conversion.
Increased Dependability: Secure overall performance beneath variable hundreds.
For a longer time Battery Lifetime: Constant and precise charging profiles.
Summary
The EPEVER Solar Charge Controller with multiphase synchronous rectification know-how is an Extraordinary option for optimizing solar power era and increasing battery life. By adhering to the above mentioned set up tutorial, consumers can assure maximum efficiency and process longevity.